Saturday, April 28, 2007

Hub and spokes

I am in favour of a feeder system to bring commuters to bus terminals and MRT stations. It operates like the hub and spoke system used in airlines. Details below.

---------------------------------------------------------------------------------

Most of the 12 major U.S. passenger airlines use a hub-and-spoke network to route their plane traffic.

A hub is a central airport that flights are routed through, and spokes are the routes that planes take out of the hub airport.

Most major airlines have multiple hubs. It allow them to offer more flights for passengers.

Atlanta is a hub that serves many other cities throughout the U.S. and around the world.

The hub-and-spoke system became the norm for most major airlines after the U.S. federal government deregulated the airlines in 1978.

Under the direct-route, or point-to-point, system used prior to deregulation, airlines were forced by the federal government to fly directly between two small markets.

This resulted in many flights that were routinely half empty, which resulted in airlines losing money. Today, most airlines have at least one central airport that their flights have to go through. From that hub, the spoke flights take passengers to select destinations.

A good example of a hub-and-spoke system is that of Delta Airlines, which has its hub at Hartsfield Atlanta International Airport.

Let's say you are in Charleston, SC, and want to go to Memphis, TN. There's probably not a lot of demand for a Charleston-to-Memphis flight, so the airline flies you from Charleston to Atlanta, and then from Atlanta to Memphis via a connecting flight.

The purpose of the hub-and-spoke system is to save airlines money and give passengers better routes to destinations.

Airplanes are an airline's most valuable commodity, and every flight has certain set costs. Each seat on the plane represents a portion of the total flight cost.

For each seat that is filled by a passenger, an airline lowers its break-even price, which is the seat price at which an airline stops losing money and begins to show a profit on the flight.

Not all airlines use the hub-and-spoke approach. For example, Southwest Airlines is one of the exceptions to the hub-and-spoke network system. It uses the old-fashioned point-to-point system, hauling people short distances with few connecting flights.

However, Southwest offers very few non-stop flights on longer routes. At the end of 2000, Southwest served approximately 306 one-way, non-stop city pairs. It's point-to-point system provides a more direct route than a hub-and-spoke airline can offer.

1 comment:

Monsoon said...

Dear Mr Tan - Beside the hub system, how about loop system - say bus from AMK to the city area - we could have a bus that goes various stops around AMK then direct by expressway to the city and then it do various stop before returning by express way. This can be done say during peak hours so that there will be capacity passengers to fill up the bus and the passenger can avoid the extra time transferring bus. The LOOP service can use the HUB as one of the stop in AMK.

I think this can easily be tried out at same time as the HUB system in running to see which is better.

Blog Archive